KX-760 Single Disc Driving Floor Scrubber 520MM
Komada KX-760 Single Disc Driving Floor Scrubber steps up from manual walk-behind units with a ride-on driving platform, letting the operator cover more ground with less fatigue. As a ride-on floor scrubber machine, it scrubs a 520mm floor width with an 830mm suction width, reaching 5,000 m²/h of work efficiency — well over double the KX-520’s output. Power comes from a 2×500W brush motor and 550W water absorption motor, backed by an 85L clean water tank and 90L sewage tank to reduce refill stops. With a 24V/100Ah battery, the KX-760 runs 3–4 hours per charge, reaching 6.2 km/h forward speed. This single disc driving floor scrubber suits medium-sized warehouses, logistics centres, and factory floors across Malaysia.
Product Specifications
| Product Code | KX-760 | |
|---|---|---|
|
Drive type
|
Driving (ride-on platform) |
|
|
Voltage / Drive |
VDC/W |
24 / 500 |
|
Forward speed |
km/h |
6.2 |
|
Reverse speed |
km/h |
3.5 |
|
Brush disk motor power |
W |
2 × 500 |
|
Water absorption motor power |
W |
550 |
|
Clear water tank capacity |
L |
85 |
|
Sewage tank capacity |
L |
90 |
|
Floor scrubbing width |
mm |
520 |
|
Suction width |
mm |
830 |
|
Work efficiency |
m²/h |
5,000 |
|
Battery |
V/A |
24/100 |
|
Dimensions (L×W×H) |
mm |
1360 × 780 × 1230 |
|
Weight |
kg |
260 |
|
Run time |
h |
3 – 4 |
|
Brush configuration |
Single disc |
|
Key Features
Driving Platform for Operator Comfort
Ride-on platform reduces walking fatigue over long cleaning runs, letting one operator cover far more floor area per shift than a walk-behind unit.
5,000 m²/h Work Efficiency
More than double the KX-520's output — suited to medium warehouses and factory floors that need faster turnaround between shifts.
Single Disc Brush System
Efficient scrubbing action for standard concrete, tile, and epoxy floors, with lower brush replacement cost than dual-brush models.
85L / 90L Dual Tank System
Larger clean water and sewage tanks than the KX-520, meaning fewer stops to refill or drain during a cleaning run.
6.2 km/h Forward Speed
Faster coverage than manual walk-behind scrubbing, cutting total cleaning time across large floor areas.
Durable Build for Daily Industrial Use
Reinforced frame and components designed for daily use in warehouses, logistics centres, and factory environments.
Why Choose the KX-760?
KX-760 Single Disc Driving Floor Scrubber bridges the gap between compact walk-behind units and larger dual-brush machines. Its 520mm cleaning width paired with 5,000 m²/h efficiency makes it a strong fit for medium warehouses, logistics centres, and factory floors in Malaysia that have outgrown entry-level scrubbers but don’t yet need a dual-brush or ride-on sweeper. As a driving floor scrubber, it reduces operator fatigue and increases daily coverage — improving cleaning throughput without a major jump in machine cost.
Why Choose Komada?
Products You May Interested
Floor Scrubber Machine
Enquiry Form
GET IN TOUCH WITH US
If you have questions or need more information about our products, feel free to reach out. Our team is ready to assist you with your warehouse needs.